Product Overview
Our corrosion resistant PPH water receiving tank is manufactured by Jiangsu Yuexin Anti‑Corrosion Equipment Co., Ltd.
We adopt PPH, PVDF or PE raw material for tank body production.
It is not a simple drainage container for chemical workshops.
It serves as safety and environmental protection component for chemical process lines.
It collects leaked acid liquid, overflow fluid and flushing water from pipes, valves and pump seals.
High corrosive medium such as hot phosphoric acid can be well contained inside.
It helps avoid medium spreading to workshop floor and concrete foundation.
Working Principle
Phosphoric acid system water receiving tank works under gravity flow in most working conditions.
Leakage, overflow or cooling wastewater flows into tank by natural drop.
Liquid gathers inside tank cavity without manual diversion.
Built‑in outlet connects with external pump set.
Collected liquid can be pumped out for material recovery or waste‑water treatment.
Whole process runs without extra power consumption for liquid collection.
Sealed structure prevents harmful volatile gas escaping to workshop air.
Tank Structure Features
We make custom industrial water receiving tank according to site layout requirements.
Available shapes include conical, square and cylindrical structure.
Can be installed above‑ground or embedded underground.
Main body adopts hot‑plate welding technology, no secondary glue bonding.
Integrated tank wall reduces risk of liquid seepage.
Reserved nozzles for liquid outlet, overflow port and level monitoring port.
Support frames can be equipped for above‑ground installation.
All welding seams go through leak inspection before delivery.
Main Technical Parameters
Material options: PPH / PVDF / HDPE, selected based on medium temperature & chemical property.
Single tank volume: 0.5m³‑50m³, support non‑standard size customization.
Applicable temperature range:‑10℃ ~95℃, varies with selected plastic material.
Interface size: DN50‑DN300, nozzle size adjustable.
Installation mode: underground buried, floor standing, tower bottom coaxial mounting.
Each underground chemical water receiving tank completes pressure‑free leak test before shipment.
Application Scenarios
Circulating cooling water receiving tank fits multiple chemical working sites.
Phosphoric acid production workshop: collect overflow and leakage of reaction tower.
Tower outer wall spray cooling water collection for phosphorus chemical units.
Mechanical seal drainage collection for vacuum pump and steam turbine.
Cooling section of rotary kiln, realize closed‑loop cooling water circulation.
Other chemical sites: pickling line, metallurgy and environmental‑protection facilities.
Recover usable process liquid, lower raw‑material loss and waste‑water disposal expense.
Inquiry
If you need water receiving tank with special dimension or material requirement.
Send us your working‑condition parameters for technical proposal.
Our team will reply and offer practical solution for your project.
Hot Tags: pph water receiving tank, China pph water receiving tank manufacturers, suppliers, factory